nica/boop
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Merge branch 'JTAG' into IR_HW_PWM

Browse source 
Conflicts:
	boop/betty.cfg
	boop/boop_rom.bin
This commit is contained in:
Telekatz 2017-07-13 21:11:37 +02:00
commit 4af6656ba7
5 changed files with 78 additions and 18 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

13
boop/Makefile
View file

@ -25,8 +25,9 @@
#ARMPATH = $(ARMBASE)/bin/
TOOLPREFIX = arm-none-eabi-
LPCTOOL = lpctool
OPENOCDPATH = F:\Tools\OpenOCD
OPENOCD = $(OPENOCDPATH)\openocd.exe -f betty.cfg -f $(OPENOCDPATH)\interface\uniprog.cfg
OPENOCDPATH = F:\Tools\OpenOCD_0_10
#OPENOCD = $(OPENOCDPATH)\bin\openocd.exe -f $(OPENOCDPATH)\scripts\interface\jlink.cfg -f betty.cfg
OPENOCD = $(OPENOCDPATH)\bin\openocd.exe -f $(OPENOCDPATH)\scripts\interface\uniprog.cfg -f betty.cfg
###############################################################
#####
@ -42,12 +43,9 @@ OD = $(ARMPATH)$(TOOLPREFIX)objdump
SIZE = $(ARMPATH)$(TOOLPREFIX)size
CPUFLAGS = -mcpu=arm7tdmi-s
OPTFLAGS = -Os
CFLAGS = -Wall -mthumb-interwork
CFLAGS = -Wall -mthumb-interwork -g3 -c
INC = -I. -Iinterrupt -Idisplay -Ikeyboard -Iaudio -Iinfrared -Iserial -Iflash -Icc1100 -Igui -Itimer -Igames -Iadc -Irtc -Itools
ASFLAGS = -g -I. -mthumb-interwork
#LDFLAGS = -Tlpc2220_rom.ld -Map boop.map
#LIBS = -lc -lgcc
LDFLAGS = -mthumb-interwork -nostartfiles -Xlinker -Map -Xlinker boop.map -Tlpc2220_rom.ld
THUMBFLAGS = -mthumb
@ -55,6 +53,9 @@ COMPILE = $(CC) $(CPUFLAGS) $(CFLAGS) $(INC)
ifeq ($(MAKECMDGOALS),debug)
COMPILE += -D DEBUGMODE
OPTFLAGS = -O0
else
OPTFLAGS = -Os
endif
ifeq ($(MAKECMDGOALS),release)

34
boop/betty.cfg
View file

@ -20,24 +20,31 @@ if { [info exists CPUTAPID ] } {
}
#coonfigure reset options
jtag_nsrst_delay 50
jtag_ntrst_delay 50
adapter_nsrst_delay 1
jtag_ntrst_delay 1
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst srst_pulls_trst trst_push_pull srst_push_pull
reset_config srst_only srst_pulls_trst trst_push_pull srst_push_pull
jtag_khz 1000
adapter_khz 1000
#jtag scan chain
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
# Event handlers
$_TARGETNAME configure -event reset-start {jtag_khz 1000}
$_TARGETNAME configure -event reset-start {adapter_khz 1000}
$_TARGETNAME configure -event reset-init {betty_init}
$_TARGETNAME configure -event gdb-attach {
halt
}
$_TARGETNAME configure -event gdb-attach {
reset init
}
arm7_9 dcc_downloads enable
$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x10000 -work-area-backup 0
@ -45,7 +52,7 @@ $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x10000 -work-
#flash bank <name> <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME cfi 0x80000000 0x00100000 2 2 $_TARGETNAME
flash bank $_FLASHNAME cfi 0x82000000 0x00100000 2 2 $_TARGETNAME
#flash bank $_FLASHNAME cfi 0x82000000 0x00100000 2 2 $_TARGETNAME
arm7_9 fast_memory_access enable
@ -60,7 +67,7 @@ proc betty_init { } {
# Activate PLL settings
mww 0xe01fc08c 0xaa
mww 0xe01fc08c 0x55
sleep 100
#sleep 100
# Memory Bank Configuration
# BCFG0: 16bit, rble, 2wst - 30 mhz : Betty: FLASH 0 @ 0x80000000
@ -69,7 +76,7 @@ proc betty_init { } {
mww 0xffe00008 0x10000420
# BCFG1: 8 bit, 3 sram wst, rble, 5 wst 3 idcy : Betty: LCD @ 0x81000000
#mww 0xffe00004 0x00000400
mww 0xffe00004 0x00000400
# GPIO Pin COnfiguration for Flash access
# PINSEL0:
@ -88,14 +95,19 @@ proc betty_init { } {
mww 0xe0028008 0x002018D0
# disable watchdog
#mww 0xfffffd44 0x00008000
mww 0xfffffd44 0x00008000
# enable user reset
#mww 0xfffffd08 0xa5000001
mww 0xfffffd08 0xa5000001
}
proc flash_boop {IMAGE} {
reset init
flash erase_sector 0 0 0
flash erase_check 0
flash erase_sector 0 0 last
flash erase_check 0
flash write_bank 0 $IMAGE 0
reset run
}

47
boop/betty.gdbinit Normal file
View file

@ -0,0 +1,47 @@
monitor reset 100
monitor halt
monitor endian little
# BCFG0: 16bit, rble, 6wst - 60 mhz : Betty: FLASH 0 @ 0x80000000
monitor memU32 0xFFE00000 = 0x100004A0
#BCFG2: 16bit, rble, 6wst - 60 mhz : Betty: FLASH 1 @ 0x82000000
monitor memU32 0xFFE00008 = 0x100004A0
#PINSEL0
monitor memU32 0xE002C000 = 0x00008005
#PINSEL1
monitor memU32 0xE002C004 = 0x00000000
#PINSEL2
monitor memU32 0xE002C014 = 0x0de049d4
#IO2SET
monitor memU32 0xE0028024 = 0x1FC0000
#IO2DIR
monitor memU32 0xe0028028 = 0x1FC0000
#IO0DIR
monitor memU32 0xE0028008 = 0x002018D0
#PLLCON: Enable PLL, connect PLL
monitor memU32 0xe01fc080 = 0xe01fc000
# VBPDIV:
monitor memU32 0xe01fc100 = 0x00000000
#PLLCFG:
monitor memU32 0xe01fc084 = 0x00000045
#Activate PLL settings
monitor memU32 0xe01fc08c = 0xaa
monitor memU32 0xe01fc08c = 0x55
# Enable Flash Breakpoints and Download
monitor WorkRAM = 0x40000000 - 0x2000FBFF
monitor flash CFI = 0x80000000 - 0x800FFFFF
monitor flash breakpoints = 1
monitor flash download = 1

BIN
boop/boop_rom.bin
View file

Binary file not shown.

2
boop/cc1100/rf.c
View file

@ -413,7 +413,7 @@ void startRFIRQ(void) {
VICIntEnable = INT_EINT0;
}
inline void stopRFIRQ(void) {
void stopRFIRQ(void) {
VICIntEnClr = INT_EINT0;
}