Reorganize repository structure

lpctool/lpc2220_rom.ld

@@ -0,0 +1,61 @@
+/* identify the Entry Point  */
+
+ENTRY(_startup)
+
+/* specify the LPC2106 memory areas  */
+
+MEMORY 
+{
+	flash	: ORIGIN = 0x80000000, LENGTH = 1M		/* FLASH ROM		*/	
+	ram  	: ORIGIN = 0x40000200, LENGTH = 64K - 0x220	/* free RAM area	*/
+}
+
+/* define a global symbol _stack_end  */
+
+_stack_end = 0x4000FEDC;
+
+/* now define the output sections  */
+
+SECTIONS 
+{
+	. = 0;			/* set location counter to address zero  */
+	
+	startup :
+	{
+		*(.startup)
+	} >flash		/* the startup code goes into FLASH */
+
+	.text :			/* collect all sections that should go into FLASH after startup  */ 
+	{
+		*(.text)	/* all .text sections (code)  */
+		*(.rodata)	/* all .rodata sections (constants, strings, etc.)  */
+		*(.rodata*)	/* all .rodata* sections (constants, strings, etc.)  */
+		*(.glue_7)	/* all .glue_7 sections  (no idea what these are) */
+		*(.glue_7t)	/* all .glue_7t sections (no idea what these are) */
+		_etext = .;	/* define a global symbol _etext just after the last code byte */
+	} >flash		/* put all the above into FLASH */
+
+	.data :			/* collect all initialized .data sections that go into RAM  */ 
+	{
+		_data = .;	/* create a global symbol marking the start of the .data section  */
+		*(.data)	/* all .data sections  */
+		_edata = .;	/* define a global symbol marking the end of the .data section  */
+	} >ram AT >flash	/* put all the above into RAM (but load the LMA copy into FLASH) */
+
+	.bss :			/* collect all uninitialized .bss sections that go into RAM  */
+	{
+		_bss_start = .;	/* define a global symbol marking the start of the .bss section */
+		*(.bss)		/* all .bss sections  */
+	} >ram			/* put all the above in RAM (it will be cleared in the startup code */
+
+	. = ALIGN(4);		/* advance location counter to the next 32-bit boundary */
+	_bss_end = . ;		/* define a global symbol marking the end of the .bss section */
+}
+	_end = .;		/* define a global symbol marking the end of application RAM */
+
+PROVIDE( BCFG0 = 0xFFE00000);
+PROVIDE( BCFG1 = 0xFFE00004);
+PROVIDE( BCFG2 = 0xFFE00008);
+PROVIDE( PINSEL0 = 0xE002C000);
+PROVIDE( PINSEL2 = 0xE002C014);
+PROVIDE( IO0PIN = 0xE0028000);