Reorganize repository structure

betty_scart/readme.txt

@@ -0,0 +1,45 @@
+
+To run the programm the following µC settings has to be changend:
+
+(with Betty-Heaven -> Scart -> Konfiguration)
+
+UCFG1:       07
+UCFG2:       FF
+Boot Vector: 00
+Status Byte: 00
+
+
+If you use the SCART-Betty-Kombiinterface remove R2, otherwise the programm will not work!
+
+Serial settings: 38400,n,8,1, no handshake
+
+
+Commands:
+
+
+Terminal Mode:
+==============
+
+t<data>                                 transmitt <data>
+s                                       show cc1100 status bytes
+c                                       show cc1100 configuration registers
+b                                       switch to binary mode
+w                                       send WOR packet
+
+Binary mode:
+============
+ 
+0x00                                    NOP
+0x01 <n> <data_1> ... <data_n>          transmitt n Bytes (n<=61)
+0x02 <cmd>                              send command strobe to cc1100, get status byte
+0x03 <addr>                             read cc1100 single byte
+0x04 <addr> <value>                     write cc1100 single byte
+0x05 <n> <addr>                         read n bytes cc1100 burst mode
+0x06 <n> <addr> <data_1> ... <data_n>   write n bytes cc1100 burst mode
+0x07 <addr>                             send WOR packet
+
+Return value
+
+0x00                                    syntax error
+0x01                                    ready
+0x02 <n> <data_1> ... <data_n>          n bytes data received